Hi Emmanuel,
I'm sorry for the troubles you're having with one of the servos! Please email your address to scott@spierce.com and I will drop a replacement servo in the mail for you.
Thanks,
Scott Pierce
Search found 37 matches
- Thu Feb 14, 2019 8:35 am
- Forum: Troubleshooting
- Topic: One bad servo
- Replies: 1
- Views: 47381
- Mon Jan 14, 2019 5:44 pm
- Forum: mePed Hardware
- Topic: How should the proportion of 3D parts be?
- Replies: 1
- Views: 82132
Re: How should the proportion of 3D parts be?
Hello,
The parts were drawn in Imperial Units (Inches) and most 3D printers use the Metric System (mm). The parts will need to be scaled to 2540% or 25.4 times the size you're seeing in CURA.
Thanks,
Scott Pierce
The parts were drawn in Imperial Units (Inches) and most 3D printers use the Metric System (mm). The parts will need to be scaled to 2540% or 25.4 times the size you're seeing in CURA.
Thanks,
Scott Pierce
- Tue Dec 11, 2018 7:22 pm
- Forum: Troubleshooting
- Topic: One leg shifting off-center on powerup
- Replies: 1
- Views: 59280
Re: One leg shifting off-center on powerup
Hello, thank you for your post. I'm sorry you're having some issues with your mePed! 1) It sounds like the servo isn't working properly. Upon turning the mePed on, all servos should move to their center (90°) position and stay there until you command the mePed to move. Some movements such as dancing...
- Tue Oct 16, 2018 9:49 pm
- Forum: mePed Software
- Topic: Meped software
- Replies: 1
- Views: 88803
Re: Meped software
Hi Antonio, Thank you for your question. The meped_testservorange program you mentioned wasn't written by us but rather, another mePed owner. I downloaded a copy of the program tonight and was able to download it to one of our mePeds without any errors so I'm not quite sure what is causing the issue...
- Wed Aug 22, 2018 9:40 pm
- Forum: mePed Hardware
- Topic: MOSFET used in mePed
- Replies: 1
- Views: 81081
Re: MOSFET used in mePed
Hi Yosauron,
We don't use any MOSFETs on the mePed PCB. The large TO-220 package you're probably thinking of is a 3.3v Regulator. All 8 servos are powered directly from the battery pack.
Thanks,
Scott Pierce
We don't use any MOSFETs on the mePed PCB. The large TO-220 package you're probably thinking of is a 3.3v Regulator. All 8 servos are powered directly from the battery pack.
Thanks,
Scott Pierce
- Wed May 30, 2018 5:51 pm
- Forum: mePed Software
- Topic: Raspberry Pi / Python
- Replies: 1
- Views: 51041
Re: Raspberry Pi / Python
Hi smcculley,
Unfortunately I haven't seen any Raspberry Pi ports of the mePed code yet and a quick Google search didn't reveal anything either.
Thanks,
Scott Pierce
Unfortunately I haven't seen any Raspberry Pi ports of the mePed code yet and a quick Google search didn't reveal anything either.
Thanks,
Scott Pierce
- Wed May 30, 2018 5:45 pm
- Forum: Troubleshooting
- Topic: Servo problem
- Replies: 1
- Views: 50079
Re: Servo problem
Hi cbosso,
I apologize for the delayed response and the issue you're having with the servo! Please email your address to scott@spierce.com and I will ship out a new servo. It sounds like the potentiometer in that one servo is faulty.
Thanks,
Scott Pierce
I apologize for the delayed response and the issue you're having with the servo! Please email your address to scott@spierce.com and I will ship out a new servo. It sounds like the potentiometer in that one servo is faulty.
Thanks,
Scott Pierce
- Wed May 30, 2018 5:42 pm
- Forum: Troubleshooting
- Topic: Servo stuck in one position
- Replies: 3
- Views: 67354
Re: Servo stuck in one position
Hi Hanail, I apologize for the delayed response and the issue you're having with one of your servos. Just to clarify, when centering the servo, since the servo isn't plugged in, there should not be a humming noise when trying to rotate the servo to the centered position. If it is plugged into the me...
- Wed Jan 17, 2018 8:24 pm
- Forum: Troubleshooting
- Topic: servo malfunctioning
- Replies: 6
- Views: 98883
Re: servo malfunctioning
Hi Barney,
I'm glad you were able to get your mePed up and running! Please let me know if there's anything else I can do to help.
Thanks,
Scott Pierce
I'm glad you were able to get your mePed up and running! Please let me know if there's anything else I can do to help.
Thanks,
Scott Pierce
- Thu Jan 11, 2018 7:04 pm
- Forum: Troubleshooting
- Topic: servo malfunctioning
- Replies: 6
- Views: 98883
Re: servo malfunctioning
Hi Barney, I'm glad you were able to make some progress with your mePed! It sounds like for your first issue of the robot tetering on two legs, you'll need to adjust two of your Leg Servo Arms. Referencing page 4, step 9 of the mePed Assembly Manual and this picture: mePed Leg Position.jpg If you lo...